Thermal Test Electronics  –  Environmental Stress Testing –  Environmental Test Chamber – Temperature Forcing Systems – Temperature Inducing Electronics

 Temperature Cycle Test –  Thermal Test Systems –  Temperature Testing Chamber –  Thermal Shock Electronics –  Temperature Test Electronics

 Thermal Test Electronics  –  Temperature Cycling Test Electronics –  Temperature Testing Chamber –  Environmental Testing Electronics –  Temperature Test Electronics

PCB Thermal Test – Temperature Forcing Electronics – Temperature Test Microelectronics –  Thermal Test Systems  –  Temperature Testing Circuit Boards

PHOTO-2019-04-22-14-43-28











Electronic Temperature Test

Environmental temperature test chambers can just go so far when it comes to precise thermal control, fast ramp rates, and narrow temperature margins. Instead of taking your parts to a large test chamber, MPI ThermalAir systems bring the temperature to your test site location.

-100°C / +300°C

PHOTO-2019-04-22-14-43-28











Electronic Temperature Test

Environmental temperature test chambers can just go so far when it comes to precise thermal control, fast ramp rates, and narrow temperature margins. Instead of taking your parts to a large test chamber, MPI ThermalAir systems bring the temperature to your test site location.

-100°C / +300°C

Electronics Test Applications

ThermalAir TA-5000 temperature testing equipment and chambers can thermal test any electronic, electromechanical, and non-electronic components at wide temperature ranges to meet your application requirements.

Industrial electronic manufacturers offer features with reliable operating performance specifications and they guarantee their products are under the most demanding outdoor conditions.

The ThermalAir TA-5000 brings localized temperature right to the test. Our ThermalAir systems are used at the test station, in the engineering lab and on the production test floor.

Temperature Test Equipment

 Thermal Test Electronics  –  Thermal Testing Electronics –  Environmental Test Chamber –  Temperature Cycling Test –  Temperature Test Electronics

Electronics Temperature Test Articles

Sensors, latches, adhesives or any electronic and mechanical parts that get exposed to outdoor harsh environments need to work and operate once installed in the field.

When your thermal test requires focused localized temperatures at the test site, ThermalAir TA-5000 temperature inducing equipment can be used to provide temperatures for a variety of environmental test applications.

Electronics Temperature Test | Temperature Cycling Test Electronics | Thermal Shock
Electronics Temperature Test | Temperature Cycling Test Electronics | Thermal Shock
Electronics Temperature Test | Temperature Cycling Test Electronics | Thermal Shock
Electronics Temperature Test | Temperature Cycling Test Electronics | Thermal Shock

ThermalAir TA-Series Temperature Test Systems

ThermalAir stream temperature forcing systems are used in a variety of industrial electronic test applications. Thermal cycling and temperature characterization of your parts in industries such as automotive, telecom, aerospace, medical, sensors, RF microwave and other electronic temperature test applications is what the ThermalAir TA-Series of temperature equipment provides for many product market segments.

 Thermal Test – Temperature Forcing Electronics –  Temperature Testing Electronics –  Environmental Testing Electronics –  Ambient Temperature Test Electronics

Thermal Cycling Electronic Devices and Other Test Articles

The ThermalAir TA-5000 Series can provide accurate temperature stimuli so the electronic component manufacturers can design, develop and produce highly reliable quality parts that meet the demanding standards of today’s electronic technologies.

All types of electronic and non-electronic devices require temperature cycling and thermal shock test to make sure industrial products are unaffected by changes in temperature and other harsh environmental stress conditions.

The ThermalAir TA-5000 Series brings controlled temperature right to the test.

Thermal Cycle PCB’s, Componets, and Parts

Temperature cycling, thermal profiling and other environmental temperature conditioning is why MPI Thermal systems are part of the manufacturing temperature test process.

MPI Thermal temperature inducing equipment is portable and can easily be moved from one test station to another. Fiber Optic Component manufacturers can use our ThermalAir TA-5000 system to quickly bring their parts to temperature right at the test location.

Thermal Stream Sqaure Cap 1
Thermal Stream Sqaure Cap 2

Thermal Stream Sqaure Cap 3
previous arrow
next arrow

Bring temperature to your test for automotive electronics and non-electronic components from temperature -40°C to +150°C.

  • Automotive Sensors                         
  • Vehicle Control Products
  • Electronic Control Units or ECUs
  • Incoming Inspection
  • Semiconductor IC Verification
  • Simulation-based testing
  • Cooling Heating Stress Full Cycle
  • Design or Fabrication Weakness
  • Fast Hot & Cold Thermal Cycling
  • Electronic and Mechanical Subsystems

And More…

ThermalAir Thermal Test
Systems for Electronics

The design challenges go well beyond simply delivering processing power and high-speed data transfer. Design engineers must also safely manage heat generated by those processes in the confines of tight vehicle packaging requirements, as well as ambient and cold temperature fluctuations, while adhering to stringent safety and reliability standards of the electronics industry.

Electronics Temperature Test | Temperature Cycling Test Electronics | Thermal Shock

Environmental Stress Testing

Environmental stress conditions such as radiation exposure, temperature extremes, vibration, and dirt encountered by the military, on factory floors, and under the hoods of automobiles, these semiconductor devices need to keep working. To assure quality and reliability of electronic devices, semiconductor manufacturers need to simulate harsh environments during the engineering and production test stage. This is why the MPI Thermal TA-5000 Series ThermalAir temperature test products are part of the test.

TA1000 Temperature Cycling Test System | Thermal Cycling Test | Temperature Cycling Test Equipment |Thermal Cycling

Thermal Cycle PCB’s, Componets, and Parts

The ThermalAir TA-5000 Series can provide accurate temperature stimuli so the electronic component manufacturers can design, develop and produce highly reliable quality parts that meet the demanding standards of today’s electronic technologies.

All types of electronic and non-electronic devices require temperature cycling and thermal shock test to make sure industrial products are unaffected by changes in temperature and other harsh environmental stress conditions.

Temperature Cycling Test System | Thermal Cycling Test | Temperature Cycling Test Equipment |Thermal Cycling

Temperature Forcing System

MPI ThermalAir temperature forcing systems provide a direct thermal stream of clean dry hot and cold air directly to the part that needs to be thermal tested. In the lab or on the production floor, ThermalAir Series provide unparalleled thermal stress testing  capabilities for scientist and engineers.

The ThermalAir system allows you to generate very precise controlled temperature for simulation test in Thermal Shock, Temperature Conditioning, Stress Screening, Temperature Cycling and more. Thermal test processes can be accomplished with our ThermalAir system. Ramp, Cycle, Dwell and Soak times are fully programmable with a touch of a button.

Field Application Engineer

Job Location: San Jose, CA

Job Duties:

  • Assist in developing HW and SW measurement methodologies/solutions for analytical wafer probe solutions with signal applications from DC to millimeter wave frequencies as well as Silicon Photonics (SiPH);
  • Collaborate with customers on their measurement challenges, and provide applications specific product training;
  • Provide pre- and post-sale support to AST, customers, service department, and the sales channel developing HW and SW measurement solutions for analytical wafer probe stations;
  • Define application-specific solutions based on customer-provided device data and facilitate both customer and divisional teams to successful results;
  • Perform product training seminars for customer and sales channels as well as participate in trade shows and technical seminars;
  • Make recommendations regarding product improvement, new products, and quality enhancement;
  • Author, document, publish, and present measurement solutions via Seminars, Applications Notes, Briefs, and White Papers;
  • Prepare, plan, and assist with customer product demonstrations that highlight value-based differentiation of AST product offerings;
  • Develop unique and individual customer presentations designed to professionally position the MPI brand in the North American market and deliver formal presentations to customers.

Job Requirements:

Master’s degree in Electrical Eng., Electronics Eng., Physics, or Photonics; Must possess 6 months of relevant work experience; Travel to customers’ sites in US and headquarters in Taiwan is required.

Send resume to: MPI America, Inc., 2360 Qume Drive, Suite C, San Jose, CA 95131, Attn: Janet Chiang