Cold Temperature Test | Thermal Test Equipment | Accelerated Temperature Test | Thermal Cycling | Rapid Thermal Cycling | Temperature Test

An Evolution in Rapid Thermal Cycling

ThermalAir TA-5000 Series of Temperature Test Systems

The ThermalAir TA5000 is a compact, portable bench top environmental hot and cold environmental  test system.

Learn More
Temperature Test Chamber

Thermal Test Equipment

Temperature-Testing-Range

Instead of taking your parts that need accelerated temperature testing to an oven or environmental chamber, our thermal test equipment system allows you to perform your rapid temperature profiling test  right where you need it – at your test bench, on your production floor or in your test laboratory.

The ThermalAir temperature test products are a  series of high capacity thermal air stream systems that are used for temperature testing, rapid thermal cycling and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperatures from -90°C to +225°C

Two Color Touch Screen Displays

The ThermalAir 5000A has a front panel display and a thermal head display. The thermal head color touch screen gives the user the ability to set temperature parameters and monitor all system operations at the test site location.

Learn More

Some Applications:

  • Product Engineering
  • Back-End Test
  • Incoming Inspection
  • IC Handler Verification
  • Functional Test
  • Cooling the IC while Stress Full Cycle
  • Failure Analysis
  • Final Test

ThermalAir Systems

The ThermalAir TA-5000 products with a wide range of temperature test capabilities. Bench top -40°C to +80°C applications to temperature cycling -100°C to +300°C environmental temperature test. The TA-5000 is used for rapid temperature cycling in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

Environmental Test Chamber
TA-5000A with Hood
Small Thermal Test Chamber
TA-5000A with Clamshell & Flex Hose
TA-5000A-with-Glass-Cap-2-1-2
TA-5000A with Glass Cap
TA-5000A-with-Hood-1-1
TA-5000A with Hood
TA-5000A-with-Clamshell-Flex-Hose-2-1
TA-5000A with Clamshell & Flex Hose
TA-5000B-with-Flex-Hose-1-1
TA-5000B with Flex Hose
TA-5000B-with-Clamshell-Flex-Hose-1-1
TA-5000B with Clamshell & Flex Hose

Performance Plus
Flexibility

TA-5000

TA-5000

Learn More
ThermalAir Acessories

ThermalAir Acessories

Learn More
ThermalAir Compact Chambers

ThermalAir Compact Chambers

Learn More

Specification Features & Benefits

  • Ultra Cold Temperatures maintained at 50&60Hz
  • Dual Touch Screens Front Panel & Thermal Head
  • Plug-in anywhere from 200~250VAC, 1Ø
  • ECO Smart DC system for up to 50% energy saving
  • No voltage configuration to use at different locations
  • Versatile Boom & Stand – Extended reach standard
  • SSD for thermal file management and data logging
  • Control Heated dry air purge for frost free operation
  • One touch Temp Cycle, Ramp, Soak and Dwell
  • Ultra low audible noise for quiet engineering lab use

ThermalAir 5000A Head with Glass Cap Enclosure

Outputs a controlled clean dry thermal air stream directly on your test part

OUTPUT TEMPERATURE CONTROL

ThermalAir can control by user setting, the ramp rate, temperature transition time as fast as -55°C to +125°C in less than 10 seconds

HOW DOES IT WORK

The TA-5000’s built-in air dryer and filtering system sends clean dry air (CDA) through its powerful internal chiller / heat exchanger to deliverS hot & cold temperatures from -100°C up to +300°C.

User can control flow rate from 2 to 20 SCFM. The ThermalAir temperature system is all self-contained. You just plug it in and it’s ready to start thermal testing your parts. [No configuration required].

Learn More

System Performance

  • Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
  • Typical Temperature transition rate:
-55° to +125°C: approximately 10 seconds
+125° to -55°C: approximately 10 seconds
  • Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
  • Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
  • Temperature set, display and resolution: ±0.1°C
  • Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
  • Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.

Design for Performance

Semiconductor IC devices on the test bench top setup in an engineering product development environment

product-005

ThermalAir 5000 Accessories

Temperature Conditioning Glass Enclosure

High Temperature Glass Cap Enclosures

Temperature Conditioning Accessories

Non-Conductive High Temperature Shroud kit

Temperature Conditioning Chamber Flex Hose

Flex Transfer Hose

Temperature Conditioning Chamber

Compact Environmental Chamber Clamshell Model

Temperature Test Enclosure

Compact Environmental Chamber Hood Model

Cold Temperature Test | Temperature Test Equipment | Accelerated Temperature Test | Thermal Cycling | Rapid Thermal Cycling | Rapid Temperature Cycling