Environmental Chambers | Environmental Test Chambers | Benchtop Environmental Chambers| Benchtop Test Chambers | Thermal Chambers | Thermal Test Chambers | Test Chambers

Environmental Test Chambers

ThermalAir Series of Environmental Test Chamber

The ThermalAir TA5000 is a compact, portable bench top environmental test chamber system.

Learn More
Environmental Chamber

Environmental Test Chamber

Temperature Range Testing

Instead of taking your parts that need environmental temperature testing to an oven or environmental test chamber, our temperature cycling chamber test system allows you to perform your environmental temperature testing and thermal profiling right where you need it – at your test bench, on your production floor or in your test laboratory.

The ThermalAir environmental test chambers systems are a  series of high capacity thermal air stream systems that are used for environmental testing, fast temperature cycling and device temperature profiling of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature testing ranges from -90°C to +225°C

Environmental Test Chambers

ThermalAir Environmental Chambers

The ThermalAir TA-5000 products with a wide range of environmental temperature testing capabilities. Bench top -40°C to +80°C applications to temperature cycling -100°C to +300°C environmental test. The TA-5000 is used for temperature testing in engineering product development test labs and production test floors for semiconductor IC devices and all kinds of electronic – non-electronic components and other parts and assemblies.

Environmental Chamber
TA-5000A
Environmental Test Chamber with Clamshell & Flex Hose
Environmental Chamber
TA-5000A
Environmental Test Chamber with Hood
Environmental Chamber
Environmental Chamber

TA-5000A Environmental Test Chamber with Clamshell & Flex Hose
Environmental Chamber
Environmental Chamber

TA-5000B Environmental Test Chamber with Clamshell & Flex Hose
Environmental Chambers | Environmental Test ChambersLocalized Environmental Chambers | Test Chamber | Temperature Cycling Chambers |
Thermal Test Chamber | Temperature Test Chamber | Benchtop Chamber | Climatic Chambers

Specification Features & Benefits

  • Ultra Cold Temperatures maintained at 50&60Hz
  • Dual Touch Screens Front Panel & Thermal Head
  • Plug-in anywhere from 200~250VAC, 1Ø
  • ECO Smart DC system for up to 50% energy saving
  • No voltage configuration to use at different locations
  • Versatile Boom & Stand – Extended reach standard
  • SSD for thermal file management and data logging
  • Control Heated dry air purge for frost free operation
  • One touch Temp Cycle, Ramp, Soak and Dwell
  • Ultra low audible noise for quiet engineering lab use

System Performance

  • Airflow: High capacity 10 l/s (20 scfm) continuous airflow optimizes temperature transition rate and throughput.
  • Typical Temperature transition rate:
-55° to +125°C: approximately 10 seconds
+125° to -55°C: approximately 10 seconds
  • Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C
  • Temperature control Sensor Ports: Type T or Type K thermocouple, and 100 ohm RTD
  • Temperature set, display and resolution: ±0.1°C
  • Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
  • Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, And Ethernet, 4 USB-Type A, 1 USB-Type B, VGA, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb. All this makes for simple control and service ability.
Temperature Conditioning Chamber

Environmental Benchtop Chamber Model

Temperature Test Enclosure

Environmental Chamber Hood Model

Environmental Chambers | Environmental Test ChambersLocalized Environmental Chambers | Test Chamber | Temperature Cycling Chambers |
Thermal Test Chamber | Temperature Test Chamber | Benchtop Chamber | Climatic Chambers